Guide

Why Won't Scene Recast Accept My Video?

Scene Recast refuses a video when it is not an MP4 or MOV file with a readable picture, lasts less than 4 seconds or more than 2 minutes, is larger than 200 MB, has a short side under 720 pixels, has more than 40 megapixels, or is too narrow to keep 720 pixels on its short side once its long side is brought to 3840 pixels. Photos must be JPG, PNG or WebP files of 10 MB at most. The message the studio shows names the rule the file broke, so fix that one thing and upload the file again. Twistavo is an AI video studio for character swap: replace a person in a real video from 1 to 4 photos; plans from $3.99/month.

Open Scene Recast

How to prepare a clip and photos that upload

  1. Trim the clip to 4 seconds to 2 minutes in Standard 720p, less in other tiers, as little as 17 s in Max 1080p and export it as MP4 or MOV. When a file cannot be read, the studio asks for an MP4 in H.264, so that export is the safest.
  2. Keep the video at 200 MB or less: a shorter clip or a lower export bitrate makes the file smaller.
  3. Use a frame whose short side is at least 720 pixels (720p). A vertical phone video passes as long as its width reaches 720 pixels.
  4. Add one JPG, PNG or WebP photo per person, 10 MB at most each, up to 4 photos.
  5. Wait until a file has finished uploading before you add the next one.
  6. If a file is refused, read the message under it and find it in the list below.

No video the studio can read

The full message is “This file has no video we can read. Export it again as an MP4 (H.264) video.” The file has no picture the studio can decode: an audio-only file, a still image saved with a video extension, or a video in a codec that cannot be read. Open the clip in your editor or phone and export it again as an MP4 with the H.264 codec, then upload the new file.

Clip too short or too long

For a 150-second clip the message is “This video lasts 150 seconds. Choose a scene between 4 seconds and 2 minutes.” Scene Recast takes clips of 4 seconds to 2 minutes in Standard 720p, less in other tiers, as little as 17 s in Max 1080p. Trim a long clip to the scene you want to recast, or cut it into several clips and recast each one. A clip that is too short cannot be stretched: film or export a longer take.

Frame too small

For a 480p export the message is “This video is 854×480 pixels. Its short side must be at least 720 pixels (720p).” The short side of the frame needs at least 720 pixels, whatever the orientation. Export the original clip again at 720p or higher instead of a copy downloaded from a messaging app, which is often reduced.

Frame too large or too narrow

A frame of more than 40 megapixels is refused, for example “This video is 8192×5120 pixels, too large to read. Export it at 4K or less.” Export the clip again at 4K or less. A frame is also refused when its long side, brought down to 3840 pixels, would leave less than 720 pixels on its short side, for example “This video is 720×4000 pixels, too narrow to fit 3840 pixels while keeping 720 on its short side. Crop it to a wider frame.” Crop the clip to a wider frame and export it again.

File too large, or storage full

The message “The file or request exceeds the allowed size.” means the video is over 200 MB or a photo is over 10 MB. Export the video shorter or at a lower bitrate; save a large photo again as a JPG. When your account storage is full instead, the message is “Your storage limit is full. Remove files or saved results to upload more media.” Delete files or results you no longer need from your library, then upload again.

Format not recognized, or file damaged

“The file is empty or its format is not recognized.” appears for a file that is not a supported video or image, or a file that was not fully copied. “This file cannot be read. Try exporting it again.” appears when the file looks like a video or image but is damaged. In both cases, export the clip again as MP4 or MOV, or save the photo as JPG, PNG or WebP, and upload the new file rather than the same one.

File refused by the safety filter

The message “This file can't be used. Uploads must follow our content rules.” means our safety filter refused the file under the content policy. The same file stays refused, so uploading it again will not help: choose another clip or photo. A second different file refused within 30 days, or one video with several frames the filter is near certain about, restricts the account; it then shows “This account can't upload or generate. Contact hello@twistavo.com.” Write to that address if you think a file was refused by mistake.

Messages that ask you to wait

“Several files are already uploading. Try again in a moment.” means you added a file while others were still uploading: wait for them to finish. “Uploads are paused for a moment. Please try again shortly.” means the safety check is not available for a short time; nothing is wrong with your file, so try again a little later.

Notes that are not errors

Some notes only tell you what the studio will change before generation, and your upload is kept. A frame wider or taller than 3840 pixels, but of 40 megapixels at most and wide enough to keep 720 pixels on its short side, is reduced, for example “This video is 5120×2160 pixels. It will be resized to 3840 pixels on its long side before generation.” A clip filmed below 24 or above 60 frames per second gets a note that it will be converted. You do not need to export these clips again.

Questions

Does a refused upload use credits?

No. Credits are only reserved when you confirm a generation, after the clip and photos are uploaded, so a file refused at upload costs nothing.

Which photos give a reliable result once the upload passes?

One clear photo per person, facing the camera, with face and upper body in good light; the tips page lists what gives the most reliable result.

Can I upload a vertical video from my phone?

Yes. Orientation is not checked: the rule applies to the short side of the frame, which must be at least 720 pixels.